Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This can be due to a number of issues, such as dirty tracks or misaligned rollers.
Clean and lubricate your rollers. You can also make use of the adjustment holes at the bottom of the panel to adjust the alignment of your rollers.
Tracks that are damaged or dirty
A sliding door that does not slide as it should can be caused by an unclean or damaged track. Over repair patio door lock , grit and even rust may accumulate and block the track from being able to slide smoothly. A gentle detergent and brush will do the trick. This process should be carried out regularly to ensure smooth operation and to avoid costly repairs in the future.
A leaking door can also be a frequent issue. It requires immediate attention to stop structural deterioration, water damage and mold growth. Often the problem stems from worn weather stripping and doors that are not aligned properly, which can be corrected by replacing old weather strips and aligning the door.
Rollers that bounce off the track are a frequent issue that can be repaired with a simple DIY work. Get a partner to assist you in this endeavor as the door could be heavy. Stand inside the house, and lean the panel in front of you to reposition the rollers. When the panel is lifted off the bottom track, you'll need to place it on sawhorses to keep it from falling off. Then, loosen the roller's screws and remove them with the screwdriver. Then, you can clean any dirt that is stuck between the wheels and tracks. Then, clean each wheel by rubbing denatured alcohol on a rug. Reposition the wheels on their tracks and then attach them once more.
If a portion of the track is bent, it may be possible to straighten it by using a rubber mallet or block of wood. However in the event that the bent portion is close to the hinges and is likely to cause further damage, you'll better off calling an expert for safety reasons.
Rollers that are misaligned
If your sliding door is experiencing a problem sliding, it's most likely that the rollers have been misaligned. The wheels could be dirty, rusted or their bearings worn out. This creates friction between the floor of the door and the track, causing it to grind or snag when it's opened or closed. This can also cause the sound of squeaking.
Fortunately it's an easy fix. The wheels are on a bracket which can be adjusted, which means you don't need to take off the door. Use a screwdriver and find the holes for adjustment on the frame (usually either side). Turn the screws to turn the wheels. Turning the screw clockwise will raise the wheel while rotating it counterclockwise will lower it. Continue to adjust the door until it opens and closes easily.
It's important to adjust the wheels prior to adjusting the latch. The latch hooks have to align with the strike plate (the opening into which the latch locks) in order for the lock to work properly. If you do not do this, the latch may open or close accidentally when you're out of the room.
A sliding patio door is an investment. Keeping them in good working order will keep your family safe. By addressing common problems like damaged tracks, rollers or handles, you can prevent costly repairs in the near future. If you need help with your patio doors, get in touch with our team. We can assess your sliding patio door repair needs and help you keep it in top condition. Our experts can also assist with any replacement parts that you may need.
Damaged or loosely hung door frame
Doors for sliding patios are a wonderful option for any home. They provide a convenient and attractive alternative to hinged or swing-open patio door options. Like all hardware items sliding patio doors may become problematic over time. Many of these issues can be fixed with a little DIY expertise.
A common issue that affects sliding patio doors is gaps in the frame. It could be caused by a variety of factors, including rollers or tracks that are not aligned properly or a damaged track door, or a bowing door frame. In most instances, the issue can be fixed by removing the doors and reattaching the track. This should be done with extreme caution to avoid harm the track or frame.
In some instances, it might be required for the entire track to be replaced. This can be done quickly and easily with the universal kit that is available in all major hardware stores. These kits are easy to install and will have your door functioning properly again in no-time.
Examine your sliding door's hardware and frame for signs of wear, such as loose screws or bolts. They can usually be tightened with a screwdriver, or wrench and is a simple and effective DIY patio door maintenance process. It is also crucial to lubricate the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.
For many homeowners, their patio doors are the primary access to their backyard and outdoor living space. Therefore, they have to to function correctly to ensure the safety of their home and offer security. By taking the time to follow these easy maintenance tips homeowners can extend the life span of their sliding patio doors, and avoid expensive repairs or replacements.
Handle is not working properly
Patio doors that slide open are an ideal way to enter your backyard and enter your home, however they can be difficult to operate if damaged or misaligned. A faulty handle can also cause the door to become stuck or difficult to open and close. The good part is that repairing a loose handle is a fairly simple job that can be completed at home.
In most cases, a loose handle is simply the result of screws that have worked through the backplate. To fix the problem tighten the screws on the inside of the handle with the help of a screwdriver. If you find that the handle remains loose, it could be an indication that the threads are worn and need to be replaced.
Alternatively, a broken latch might be the culprit. This is more likely to occur if the latch is made of plastic, not metal. If the latch isn't catching or turning it, try oiling it first to see if it can help. If this doesn't work, you may have to replace the lock.
If the handle is cracked or broken, it can be difficult to operate. If this happens it is essential to replace it with a new handle that is in line with the design of your sliding patio door.
If your patio doors are old and dated or new and brand new, Feldco can help you get them back on the right track. We have doors of high-quality in a variety of sizes and styles that can be fitted to match your home perfectly. To learn more about our products, call us today! We serve Southern California homeowners, including Ventura County and Orange County.
Weatherstripping that isn't working properly
It's time to change your weather stripping if see light around closed windows and doors or notice a draft pushing towards the door or window. These strips create an airtight seal that prevents unwanted air, pests and water from entering your home. This helps to keep the conditioned and heated air inside, saving money on energy bills.
Depending on the condition of your weather stripping it may have deflated, and lost its buoyant positive seal. It is easy to determine this by running a dollar note under the seal at the top and bottom of the jamb and the door frame, where they overlap. If the dollar bill slides easily between the seal and the door easily, it is time to replace the weatherstripping.
If you only replace the worn-out part of the weather stripping, this could cause future problems with the seal. It's more efficient to replace the entire stripping to ensure that you are able to rest that your door is sealed again.
For a simple DIY project, follow our guide on weather stripping to remove old weather stripping and install the appropriate material to your sliding patio door and frame to create a durable, tight seal. This is a great way for you to save energy costs and fix your sliding patio door. Don't wait until it's too late. Your wallet and home will be thankful.